ObjectiveThe aim of this study was to demonstrate a novel jaw position adjustment technique derived from digital twins and evaluate the application effect of digital technology-assisted optimization in the process of adjusting jaw position on patients with temporomandibular disorders (TMD).MethodsA total of 74 patients with TMD who attended the Department of Temporomandibular Joint, West China Hospital of Stomatology, Si-chuan University, between June 2022 and May 2023 were selected. The patient’s initial computed tomography (CT) and bilateral temporomandibular joint data obtained by magnetic resonance imaging (MRI) were collected. The 148 joints were divided into the normal disc-condyle relationship (N) group, disc displacement with reduction (DDWR) group, and disc displacement without reduction (DDWoR) group. Assisted by digital technology, the patient’s CT data were reconstructed, and a personalized reference plane was established to adjust the jaw position. A three-point bite guiding splint was designed by the adjusted occlusal space and then fabricated by 3D printing technology. It was worn by the patients and then reviewed by MRI. Before and after the adjustment of jaw position, the amount and direction of condyle and disc displacement and the angle between condyle and disc were measured as the evaluation indexes of the effect of the adjustment. The correlation with condylar displacement was evaluated.ResultsIn the N group, the disc moved backward and downward along the X and Z axes by (-0.60±0.62) and (0.51±0.71) mm, respectively. In the DDWR group, the disc moved backward and upward along the X and Z axes by (-1.33±1.38) and (-0.09±1.31) mm, respectively. In the DDWoR group, the disc moved forward and downward along the X and Z axes by (0.49±1.76) and (1.35±1.76) mm, respectively. The angle between the condyle and the disc decreased after adjustment of the jaw position in all three groups. All patients showed improvement in symptoms after adjustment.ConclusionDigital technology-assisted jaw position adjustment can simplify the process, reduce the sensitivity of the technique, and improve patients’ disc-condyle structure and symptoms. Therefore, its application in the treatment of patients with TMD is of great clinical significance.
