Objective To evaluate the effects of different polishing methods on surface roughness of pure titanium castings. Methods 35 pure titanium castings were devided into 7 groups, used for control, mechanic polishing and electrolytic polishing, respectively. Surface roughness（Ra value） of each castings was measured with a profilometer. Surface microstructure was studied by a scaning electron microscopy, and the weight loss（Wt%） and height loss on unit area（H） before and after polishing was calculated. Results The effects of mechanic polishing with aluminium oxide or chromium oxide were acceptable. Surface smoothness was improved with acid treatment followed by electrolytic polishing. Conclusion Aluminium oxide and chromium oxide can be used in mechanic polishing of pure titanium castings, and improvement should be made on electrolytic polishing methods.
