期刊导航

论文摘要

低温低压烧结WC-8Co硬质合金

Sintering WC-8Co Cemented Carbides at Lower Temperature and Pressure

作者:孙青竹(攀枝花学院 材料工程学院);陈洪生(四川大学 制造科学与工程学院);冯可芹(四川大学 制造科学与工程学院);王海波(攀枝花学院 材料工程学院;四川大学 制造科学与工程学院);郭智兴(四川大学 制造科学与工程学院);熊计(四川大学 制造科学与工程学院)

Author:Sun Qingzhu(College of Materials Eng.,Panzhihua Univ.);Chen Hongsheng(School of Manufacturing Sci.and Eng.,Sichuan Univ.);Feng Keqin(School of Manufacturing Sci.and Eng.,Sichuan Univ.);Wang Haibo(College of Materials Eng.,Panzhihua Univ.;School of Manufacturing Sci.and Eng.,Sichuan Univ.);Guo Zhixing(School of Manufacturing Sci.and Eng.,Sichuan Univ.);Xiong Ji(School of Manufacturing Sci.and Eng.,Sichuan Univ.)

收稿日期:2012-12-21          年卷(期)页码:2013,45(3):140-145

期刊名称:工程科学与技术

Journal Name:Advanced Engineering Sciences

关键字:硬质合金;烧结;低温低压

Key words:cemented carbides;sintering;lower temperature and pressure

基金项目:四川省科技支撑计划资助项目(13ZC2133);成都市科技计划资助项目(10GGZD080GX-268;11DXYB096JH-027)

中文摘要

采用低温低压烧结WC-8Co硬质合金,并研究了烧结温度和烧结压力对硬质合金组织和性能的影响。研究结果表明:随着烧结温度的升高,WC-8Co硬质合金的孔隙减少,晶粒尺寸和密度增大;硬质合金的硬度与抗弯强度随着密度的增大而提高。当烧结温度高于1 280 ℃时,WC-8Co硬质合金的烧结方式为液相烧结;烧结压力有利于硬质合金的致密化。当烧结温度为1 300 ℃,烧结压力为5 MPa时,WC-8Co硬质合金的密度、硬度和抗弯强度分别为14.61 g/cm3、90.7 HRA和1 830 MPa。

英文摘要

The WC-8Co cemented carbides were sintered at low temperature and pressure.The influences of sintering temperature and pressure on the microstructure and properties of the cemented carbides were investigated.Results showed that with the increase of sintering temperature, the quantity of pores decreases, the grain size and density of the cemented carbides increase simultaneously.The hardness and bending strength of the cemented carbides are improved with the increase of density.When the sintering temperature is above 1 280 ℃, the sintering method of the cemented carbides is liquid-phase sintering.The improvement of density is contributed to the sintering pressure .When the sintering temperature is 1 300 ℃ and the sintering pressure is 5 MPa, the density, hardness and bending strength of the cemented carbides are 14.61 g/cm3, 90.7 HRA and 1 830 MPa, respectively.

关闭

Copyright © 2020四川大学期刊社 版权所有.

地址:成都市一环路南一段24号

邮编:610065