期刊导航

论文摘要

玻璃着色剂对可切削渗透陶瓷复合体颜色影响的研究

Investigation of the Function of the Glass Colorant on the Machinable Infiltrated Ceramics Color

作者:杨晓喻;刘长虹;廖运茂;鲜苏琴;高文峰

Author:YANG Xiao-yu1, LIU Chang-hong2, LIAO Yun-mao1, XIAN Su-qin1, GAO Wen-feng2

收稿日期:2006-06-25          年卷(期)页码:2006,24(03):221-

期刊名称:华西口腔医学杂志

Journal Name:West China Journal of Stomatology

关键字:可切削渗透陶瓷,着色剂,颜色,

Key words:machinabale infiltrated ceramics,colorant,color,

基金项目:

中文摘要

目的 观测不同配方的玻璃着色剂对可切削渗透陶瓷(MIC)复合体颜色的影响。方法 确定渗透玻璃基本组分。测定其光学指数:色散值0.068 41(435.8—656.3 nm),折射率1.596 91(587.6 nm波长)。以基本配方为核心调整形成5种着色剂配方的渗透玻璃。将它们渗透到氧化铝圆片状试件中,TC-PIIG型色差计分别测量5种MIC复合体的L*、a*、b*值并与Vita In-ceram陶瓷颜色系数比较。结果 不同着色剂配方的MIC颜色体系的的主要区别在L*值,其次是a*值,b*值变化较小。MIC颜色体系L*值为64.55—71.46,a*值为3.35—7.38,b*值为10.00—12.41,Ca*b*11.38—13.95,ha*b*54.07—73.00。与Vita In-ceram陶瓷色系颜色参数接近。结论 渗透玻璃着色剂配方的改变主要影响渗透陶瓷复合体颜色表达的明度和色相,对彩度的影响相对较小,其颜色表达符合临床应用要求。

英文摘要

Objective To investigae the function of the glass colorant on the color of the machinable infiltrated ceramics(MIC). Methods Five kinds of glass with different colorant were infiltrated through the aluminous matrix by heating the components to 1 100 ℃ for 2 hours. The specimens' surface was polished, and their thickness was 0.5 mm. Results The refractive index of the MIC infiltration glass was 1.59691(587.6 nm, nd). The most different parameter of the MIC color were L*, then a*,and b* had little difference . The parameters of the color space of MIC were: L*(64.55—71.46), a*(3.35—7.38),b*(10.00—12.41), Ca*b*(11.38—13.95), ha*b*(54.07—73.00). These were almost close to the color parameters of Vita In-ceram. Conclusion This experiment proved that the glass colorant was changed the MIC color parameters, and the main function was on L*, then a*. The ceramic color was up to the requirement of clinic.

关闭

Copyright © 2020四川大学期刊社 版权所有.

地址:成都市一环路南一段24号

邮编:610065