高分子量聚乙烯对复合应力场下诱导体系成型高密度聚乙烯管材组织与性能的影响
Morphologies and Mechanical Properties of High Density Polyethylene Pipes with High Molecular Weight PE Formed by Special Extrusion Systems Under a Complex Stress Field
作者：曹建国(四川大学 制造科学与工程学院；四川大学 高分子科学与工程学院)；高雪芹(四川大学 高分子科学与工程学院)；王朝虹(四川大学 高分子科学与工程学院)；申开智(四川大学 高分子科学与工程学院)
Author：Cao Jianguo(School of Manufacturing Sci. and Eng.,Sichuan Univ.；School of Polymer Sci. and Eng.,Sichuan Univ.)；Gao Xueqin(School of Polymer Sci. and Eng.,Sichuan Univ.)；Wang Zhaohong(School of Polymer Sci. and Eng.,Sichuan Univ.)；Shen Kaizhi(School of Polymer Sci. and Eng.,Sichuan Univ.)
收稿日期：2010-11-29 年卷（期）页码：2011,43(4):215-219
期刊名称：工程科学与技术
Journal Name：Advanced Engineering Sciences
关键字：塑料管；剪切应力；高密度聚乙烯；诱导结晶；增强
Key words：plastic pipe；shear stress；high density polyethylenes(HDPE);induced crystallization；reinforcement
基金项目：国家自然科学基金重大资助项目（10590351）；国家自然科学青年基金资助项目（50803038）
中文摘要
针对传统方法成形管材周向强度低的问题，利用自制的剪切拉伸双向复合应力场挤管装置,在向相对低分子量的通用级高密度聚乙烯中添加少量相对高分子量的高密度聚乙烯（HMWPE）进行诱导结晶的方法自增强管材的周轴两向强度。拉伸测试表明,添加6%(wt)HMWPE混合体系管材的周向和轴向力学性能分别提高了49.0%和6.9%。差示扫描量热法（DSC）、扫描电子显微镜（SEM）和X射线广角衍射（WAXD）测试表明：管材周轴两向自增强的产生是由于在复合应力场下大分子发生取向和结晶度提高所致。
英文摘要
In order to resolve the problem that circumferential tensile strength of conventional forming pipe is low, a self-made shear-tensile bidirectional combined stress field pipe extrusion equipment was used to engender induced crystallization to produce bidirectional self-reinforcement pipes by adding a small amount of relatively high molecular weight HDPE(HMWPE) to relatively low molecular weight general purpose HDPE. Results of tensile testing showed that the circumferential and axial tensile strength of the system with 6%(wt)HMWPE increases by 49.0% and 6.9%, respectively. Differential scanning calorimetry(DSC), scanning electron microscopy(SEM) and wide-angle X-ray diffraction(WAXD) test showed that macromolecule orientation under a complex stress field and the increase of crystallinity result in the bidirectional self-reinforcement of pipe.
【关闭】
